Ability to perform installation and settings for an Internet Cafe (cafe) have been considered only owned by those who have long been the world's IT administrator. With a fairly decent set fee they are willing to assist us in building a cafe that should be we use as a Production Unit. Ignorance of how a network system to run smoothly is the main reason for us to continue to use their power. Departing from the situation so I wrote this guide. Intentionally made by presenting step by step to be understood and understood even by someone totally unfamiliar jaringan.Pada these guidelines will discuss the installation and settings for a cafe that has 1 server & 12 clients as shown in the picture below:
Preparation of Hardware & SoftwareIt should be before we carry out the installation of the network, we first prepare the hardware & software that will be connected within the scope of the network. Some preparatory steps required are:1. PC Servers, the recommended minimum specifications:a. Hardware:
*? Motherboard: The speed equivalent to 3:00 GHz dual Core
*? Ram: 1 Ghz
*? Harddisk: 160 GB
*? NIC / LAN Card: 10/100 Mbps
*? Drive: DVD / CD Writer
*? Other Specifications: Optional
b. Software:
*? Windows XP SP2
*? Bandwidth Controller / Manager
*? Billing System, etc.
*? Anti Virus
*? Firewall
*? Anti-Spyware, Malware, Adware
2. PC Clienta. Hardware:
*? Motherboard: agreements equivalent to 2.80 Ghz
*? Ram: 512 MB
*? Harddisk: 40 GHz
*? VGA Card: Optional for the Game
b. Software:
*? Windows XP SP2
*? Browsing Tools:
1. Internet Explorer2. Mozilla FireFox (Free)3. Opera
*? Chat Tools:
1. Yahoo Messenger (Free)2. MSN Live Messenger3. MIRC4. ICQ
*? Online Game, Example:
1. Warcraft III2. Ragnarok Online3. Diablo II, etc.
*? Adobe Reader (Free)
*? WinZip
*? WinRar
*? Anti Virus (AVG Free Recommended)
*? Winamp (Free)
*? ACD See (Optional)
*? Microsoft Office (Optional)
*? Billing System, etc.
Operating System Window $ is very expensive, so we can buy a CPU second mensiasatinya with built-ups from abroad is still good. Usually, in addition to quality higher than the CPU assembly, CPU Built-up from abroad has also been equipped with the Windows Operating System Standards.
3. Hub / Switch / RouterIt is a tool used to share Internet connection from PC to PC serverClient. The choice between Hub / Switch / Router is determined by the ability of the connectionwant to generated, and of course be adjusted with the available funds. In the present studyOur case this time I will use the switch as the divisor Internet connection.4. ModemModem is a device that is used as a link from a PC ornetwork to Internet Service Providers (Internet Service Provider / ISP). UseModem that will be discussed this time are the type of ADSL modem. Modems of this typeusually used by ISPs TELKOMSpeedy. For this type of ADSL modem itself couldselected based on need. This time the author takes the example ADSL LynkSys AM300 which only has 1 (one) just as Dialup Device port.
External ADSL Modem SettingsHere are the steps that must be done to ensure a PC server connected toInternet:1) Open your Internet Explorer and typing the following address: 192.168.1.1 (usually isThe default IP address for the modem).2) After the login window appears fill in the username: admin Password: admin, or appropriatewith the user guide contained on the purchase of Modem.3) Fill in accordance with the one shown in the picture below, except the user name and password each different in accordance with that obtained from the ISP.4) Completion of the next is to allow DHCP Server enable / disable,Enable Option should be selected so that we are not bothered with the affairs set up oneby one IP Client. Because this facility has the capability for setting up IPClient automatically.5) For Time Zone filling done in accordance with the domicile you live. And fortime setting server shown in the figure is that my settingsrecommend.6) If we want to replace the modem username & password you are welcome tomelalukannya the following options:7) Who can we monitor our connection to the tabs status (picture), is actually an IP addresswe are listed at the bottom of the screen. I did not show for security reasons.8) After all the testing steps tersetting well we can do isby opening Internet Explorer you, then go to one of the WEB addresseasy loading. Example: Http: / / www.google.co.id/ ago for testing speedcan be done through a few sites that provide measurement servicesBandwidth, example: http://www.sijiwae.net/speedtest/.
SynchronizationAfter the relationship between PC servers and Internet connection to run smoothly stepnext synchronization. So that all computers can be synchronized correctly, here are the steps that must be done:1) Synchronization Name Computers / PCs and the name of Work Group conducted byas follows:a. Displaying Task Control System
b. In the Computer Name tab click Change to change the computer name and
Workgroup name. Computer name should be sorted according to the number
Clientnya to help us remember the name of each computer,
name of each PC should not be the same. But for the Workgroup name
must be made is the same for all Client and Server.
c. After we change the name of the PC the next step is to change the Network ID
Tab by clicking on the Network Control System ID on the task earlier.
i. On the question How Do You Use This Computer select This Computer option is part of a business network, and then click Next.
ii. In the next option choose the Network Without a Domain.
iii. Next input the workgroup name as the name WorkGorup that we fill in the time to change the name of the PC in step (b) earlier.
iv. Next Click Next and then Finish. Wait a few moments until the computer has finished the turn of the Network ID and do restrat Operating System / Reboot.
2) Synchronize Time / Clock done by taking the following steps:
a. Double click the clock face that is at the bottom left corner of your desktop.
b. Choose tabs Internet Time => Update Now
Synchronized succesfully.
d. If the show is a statement error message, then click Update Now repeat until
managed to time your PC with the Windows server.
e. If updated successfully, but the clock shown is not the same, then the error
may occur on the Time Zone to the region's time is GMT
GMT + 07:00 Bangkok, Hanoi, Jakarta, while the PST is
GMT +08:00 Perth and EST to GMT + 09:00 Seoul.
Internet Connection Sharing (ICS)
Up to this point the PC is connected keinternet hanyalan PC server only. For
provide access to the PC client to have access to the internet we need to enable Internet Connection Sharing that we have on the PC server. The steps are as follows:
1) Open the Network Connections window contained in the Control Panel. Then right-click
on our active connection to the internet => select Properties.
2) On the Advanced tabs enable the option Allow other network users to the connect through this
computer's Internet Connection.
3) After successful at sharing an Internet connection so you will have 2 pieces kinds of connections. We recommend that you change the name of each connection so you can easily distinguish antarakoneksi connected to the modem with a connection that is connected to the Switch with a way to rename each of these connections.
4) If We open the properties on the connection That Is connected to the switch, the tabs support
there is an IP address of the which will from some of the default gateway for the PC Client will of the which
connects via a PC Server (192.168.0.1).
Network Setup
The steps that we did was just to give permission for the PC client to access the Internet. To activate the license is done by setting up Network / Network that we have. Step workmanship is as follows:
1) Open the Network Setup Wizard found in Control Panel. Then do step
as shown. (make sure the connection to the internet in a state of life).
2) In the options select a Connection Method select the Connect Directly to the Internet
for PC servers and when do the settings on your PC Connect to Client Option plihlah
the internet through a residental gateway.
3) Option Here we determine the connection request which we will use
to perform dial -upto the Internet . Choose the connection that is connected to the modem.
This option does not exist at the time we do the settings in the PC Client.
Computer Description if you want (Optional / not filled no effect).
5) Fill in name of Workgroup in accordance with the name that we have set previously. Need
I remind you again that the workgroup name should be the same for all computers
for setting step easier.
6) Choose the option to Turn On File and Printing Sharing on the next task.
7) After setting the log window we think is right click next to run /
Activate the settings that we created earlier.
Wait a few moments until the computer is finished adjusting the settings
new.
9) Select the option just finish the wizard, and then click Next => Finish. Usually the PC will automatically reboot after completing the procedure.
The same steps we do on all the PC Client. The differences in settings between PCs
Server and PC Client is located at point 2 and point 3.
After completing these steps on the PC Client settings do the testing
connections in the same way with the PC Server, which visited the site address that is easy on the loading and test the connection speed. When the connection is considered too slow please do check on whether there had been setting the Network Option is wrong or not, and also do checks on wiring connections suda terposisikan whether properly or not.
Up to this step all Client PCs can connect freely to the Internet for PC Servers turn Its connection. To restrict the use of the PC Client adal several options. The first is to make the list user of client computer, which users have the right to access the Internet which are not allowed to access it. Setting is usually used in offices. As for the cafe, access restrictions are usually done by installing the billing program in C Server and PC Client. For billing products in the country already have some of them are www.billingexplorer.com developer program and setting www.indobilling.com for billing purposes, please contact the developers of each.
0 comments:
Post a Comment